Liner & Repair Products

Patching holes in your liner is not that hard once you know the basic’s in seaming together two pieces of liner. Patching holes follows the same concept as seaming liners together, only with smaller patches according to the size of the hole in your liner. The most important thing to remember is to thoroughly clean the liner with an abrasive brush or scrub pad to get it clean from any dirt or scale build-up. Once it is clean and dry you will be ready for seam tape primer to act as a bonding agent for the patch to stick. If you do not use tape primer on the liner, IT WILL NOT STICK !

If you notice you have to add water on a daily basis, or hear the “hissing” of your water fill valve constantly running, (after properly setting the water level) you may have a leak, most of which occur along the perimeter of the waterfall and stream. These leaks are generally due to the ground settling which causes the water to trickle over the edge of the liner. These leaks can be easily fixed. See our pond maintenance info on leak repair for more information.